Outdoor integrated cabinets can be seen in communities, schools, governments, business parks, and roads. They are always in an outdoor environment, so how to improve the waterproof and anti-corrosion work to ensure the life of the integrated machine? The following editor will tell you about the “outdoor integrated cabinet waterproof design, coating manufacturing process”.

1. Outdoor integrated cabinet waterproof design
2. The design of the waterproof groove of the outdoor cabinet should be reasonable, and the welding points of the waterproof groove should be fully welded.
3. The bonding of the waterproof ring or sealing strip should be reasonable, and the rationality of the size is the most important point.

It is very important for the outdoor cabinet to have good water resistance. The quality and performance of the outdoor cabinet often determine the quality and performance of the outdoor cabinet. Therefore, for outdoor cabinets, waterproofing is a link that cannot be ignored.

2. Coating manufacturing process
3. Appearance of coating

The surface of the coating should be continuous and uniform, and the texture should be consistent with the corresponding standard sample, and there should be no defects such as nodules, shrinkage cavities, blisters, pinholes, cracks, peeling, pulverization, particles, sags, exposed bottoms, and inclusions of dirt . For cabinets without spraying treatment, the gloss and texture of the outer surface should be uniform and beautiful.  

2. Coating adhesion

The coating on the surface of the cabinet meets the requirements of level 1 in Table 1 of GB/T 9286-1998 after the adhesion test.

3. Coating impact resistance

The coating on the surface of the cabinet has no defects such as radial cracks and gaps after the impact test.

4. Coating anti-aging

The coating on the cabinet surface is anti-aging.

5. The coating is resistant to solvents

After the coating on the surface of the cabinet has passed the solvent resistance test, there should be no loss of gloss, obvious color loss or signs of being wiped on the surface by visual inspection The above is the detailed description of “Outdoor Integrated Cabinet Waterproof Design, Coating Manufacturing Process”. I hope it will be helpful to you. If you have any other questions, you can consult us at any time.