In terms of the equipment of the smart light pole, the courtyard lamp should check the operation status of the rolling shear equipment and remove the sundries on the track to keep the equipment in good operation status.
During the bending process of garden light poles, it should be noted that as the most critical process in the production of light poles, the quality of the bending will directly affect the quality of the light poles and cannot be repaired after bending. These specific attentions are to first remove the cutting slag of the sheet before bending and ensure that there is no cutting slag to damage the mold during bending. Check the length, width and straightness of the sheet. In bending, it is also necessary to increase the bending depth of the bending machine and determine the orientation of the sheet metal.
In addition, it includes multiple processes such as correct alignment, firm welding, repairing and polishing, shaping, aligning, installing the bottom plate, and opening the door. These processes must have bold and careful character requirements in the course of work.
In the production process of light poles, there are some things that need to be paid attention to. Therefore, we must pay special attention in production and life.
In the production process of light poles, you need to pay attention to the following problems:
Before cutting, it is necessary to adjust the inclination of the strip cutting machine to match the required slitting knife ruler;
It is necessary to determine the orientation of the steel plate and ensure the maximum size of the remaining material so that the remaining material can be used;
The length scale is generally guaranteed by Kai and the wide bottom dimension should be greater than or equal to 2mm high rod blanking scale tolerance.
