Fiber optic jumpers are used as jumpers from equipment to fiber optic cabling links. It has a thicker protective layer and is generally used for the connection between optical transceivers and terminal boxes. It is used in some fields such as optical fiber communication systems, optical fiber access networks, optical fiber data transmission, and local area networks. So what are the characteristics and precautions of fiber optic jumpers? The following Huijue Network will give you detailed answers!

Features:

1. Low insertion loss;
2. Good repeatability;
3. Large return loss;
4. Good inter-plug performance;
5. Good temperature stability;
6. Strong tensile performance.

Precautions:

Do not excessively bend or loop the optical fiber during use, as this will increase the attenuation of light during transmission.

After using the optical fiber jumper, the optical fiber connector must be protected with a protective sleeve. Dust and oil will damage the coupling of the optical fiber.

If the optical fiber connector is dirty, you can use a cotton swab dipped in alcohol to clean it, otherwise it will affect the communication quality.

1. Before use, the ceramic ferrule and ferrule end face of the optical fiber jumper must be wiped clean with alcohol and absorbent cotton.
2. The minimum bending radius of the optical fiber is not less than 150mm during use.
3. Protect the ferrule and the end face of the ferrule to prevent bumps and pollution, and put on the dust cap in time after disassembly.
4. Do not look directly at the end face of the fiber when the laser signal is being transmitted.
5. In case of man-made or other force majeure damage, the damaged fiber jumper should be replaced in time.
6. Read the instructions carefully before installation, and carry out installation and debugging under the guidance of the manufacturer’s or dealer’s engineer.

The above are the characteristics and precautions of fiber optic jumpers. If you have other questions, you can consult us at any time.