When installing an integrated outdoor cabinet, it is necessary to ensure that the exhaust air of the cabinet is intact, whether the support columns are intact, and the model of the cabinet. The specifications and installation location should meet the design requirements, and the various parts of the cabinet should not fall off or be damaged. The types of integrated outdoor cabinets can be divided into three types: single-compartment integrated outdoor cabinets, double-compartment integrated outdoor cabinets, and three-compartment integrated outdoor cabinets. When choosing, you can choose the appropriate cabinet according to your own needs.

Installation requirements for integrated outdoor cabinets

1. Before installing the cabinet, it is necessary to check whether the exhaust equipment of the cabinet is in good condition, whether the number of equipment pallets is complete, and whether the pulleys are complete. Whether the support column is in good condition, etc.;
2. Cabinet model. The specification and installation location shall meet the design requirements;
3. The vertical deviation of the cabinet installation should not be greater than 3mm, and the horizontal error should not be greater than 2mm. When several cabinets are arranged side by side, the panels should be on the same plane and parallel to the reference line, and the front-to-back deviation should not be greater than 3mm; the gap between the two cabinets should not be greater than 3mm. For equipment arranged in a row with a certain distance from each other, the front and rear deviation of the panels shall not be greater than 5mm;
4. The various parts of the cabinet must not fall off or be damaged. If the paint surface falls off, it should be repaired in advance, and all kinds of marks should be complete. clear.

Types of integrated outdoor cabinets

1. Single cabin integrated outdoor cabinet

Single cabinet configuration form: the cabinet is divided into different functional compartments, consisting of equipment compartment + battery compartment. Normally, the equipment compartment adopts heat exchange type or air-cooled type, and the battery compartment can choose direct ventilation or semiconductor refrigeration and air-conditioning refrigeration according to the actual climate conditions of the place of use.

2. Double cabin integrated outdoor cabinet

The configuration form of combining two cabinets: the cabinet is divided into different functional compartments, one cabinet is composed of equipment compartment + battery compartment, and the other cabinet is a BBU cabinet. The equipment compartment generally adopts heat exchange or air cooling (according to the usage of the equipment, air-conditioning cooling is also used), and the BBU can adopt air cooling or heat exchange.

3. three cabins integrated outdoor cabinet

For the construction mode of dual-network sharing base stations or sites such as GSM network and 3G network, due to the large capacity of the site, the method of combining three cabinets is generally used. It usually consists of equipment cabinet 1+equipment cabinet 2+battery cabinet. The equipment compartment generally adopts heat exchange or air cooling, and the battery compartment adopts semiconductor refrigeration and air-conditioning refrigeration.

The above is your answer to “What are the technical parameters of the integrated outdoor cabinet, and what types of cabinets are there?” If you have any doubts, you can contact us at any time.