Bus architecture design
End-to-end busway architecture from UPS to PDU, replacing traditional cabling and reducing wiring complexity and points of failure
Data Center Busway
Product Overview
The smart green mini busway adopts a bus-architecture design, using busway architecture to replace traditional cabling all the way from the UPS output distribution cabinet to the PDU. The main and mini busways complete the entire end-point power distribution connection through connecting copper bars, feed-in boxes, and tap-off boxes. All plug-in power distribution units adopt a plug-and-play design, greatly facilitating installation and use, and allowing power distribution units to be connected or disconnected without interrupting power to the busway, providing uninterrupted continuous power access. The system is maintenance-free, and the power distribution units can be reused, significantly saving operation and maintenance costs.
- Architecture:
- Bus architecture, full busway connection from UPS to PDU
- Connection components:
- Connecting copper bars, feed-in box, tap-off box
- Maintenance method:
- Maintenance-free, power distribution units are reusable
- Installation feature:
- Plug-and-play; can be connected or disconnected without interrupting power to the busway
Key Advantages
Online hot-swapping
Power distribution units can be connected or disconnected without interrupting power to the busway, ensuring business continuity
Maintenance-free and reusable
Power distribution units are maintenance-free and reusable, greatly reducing operation and maintenance costs
High-density adaptability
The plug-and-play design matches high-density power distribution needs in data centers, with flexible installation and easy expansion
Application Scenarios
Data Center
Ensure stable operation of cabinets, power distribution, cabling and key equipment
Communication Base Station
Supports installation, power supply, wiring and protection for base station equipment
Carrier Transmission Node
For fiber access, convergence distribution and line management
Enterprise Computer Rooms & Edge Nodes
Supports centralized deployment of small computer rooms and edge computing nodes
Related Products
View All Products
Ac Header Cabinet
AC row head cabinet for equipment rooms, using current transformers to collect three-phase power data, supporting multi-level alarm storage, and interfacing with equipment room DCIM/environmental monitoring systems via the Modbus protocol.
Rated Operating Voltage:380V three-phase AC
IP Rating:≥IP30
Operating Temperature:-5℃~55℃
Dimensions:600-1200 300-1200 2000-2600mm
Ac Power Distribution
Three-phase AC power distribution cabinet, powered by mains electricity, featuring triple protection against short circuit, overcurrent, and overvoltage, with remote status indication support, suitable for buildings and factory scenarios.
Power supply method:Three-phase, three-wire
Operating voltage:±10% (rated)
Operating frequency:50HZ
Protection functions:Short circuit/overcurrent/overvoltage
Pv Distribution Box
PV AC grid-connected power distribution cabinet with integrated lightning protection, anti-islanding protection, and a visible isolation switch disconnect point, suitable for PV grid-connected power generation scenarios.
Lightning protection:Input surge arrester
Metering method:Sealed energy meter
Monitoring interface:RS485 (optional)
Safety configuration:Visible isolation switch disconnect point
Pv Combiner Box
PV lightning-protection DC combiner box with integrated fuses, surge arresters, and parameter acquisition, covering a voltage range of 100VDC to 1000VDC, suitable for PV power station scenarios.
Voltage range:100VDC～1000VDC
Current range:10A～160A
Enclosure finish:Electrostatic spray coating
Sealed design:Fully sealed cable entry holes
ATS Transfer Switchgear
Dual-power automatic transfer switch cabinet with a flame-retardant degreased fiber insulated switch body, supporting automatic switching between main and backup power, suitable for emergency power supply scenarios.
Product Dimensions:(400-1200)×(600-1200)×2200mm
Operating Temperature:-5℃～55℃
Insulation material:Flame-retardant degreased fiber
Applicable standard:GB/T2820
UPS Power Distribution
Standardized prefabricated UPS power distribution cabinet supporting hot-swappable miniature circuit breakers and three-phase load balancing adjustment, suitable for data center power distribution scenarios.
Product Dimensions:(400-1200)×(350-800)×(400-2200)mm
Operating Temperature:-5℃～55℃
Input type:Dual-power switching
Safety design:Front and rear panel isolation
Battery Thermostat Box
Six-sided insulated phase-change energy storage thermostatic box with a heat transfer coefficient of no more than 0.3W/(m²·K), supporting passive temperature control and remote monitoring, suitable for base station battery scenarios.
Heat transfer coefficient:≤0.3W/(㎡·K)
IP Rating:IP45
Temperature rise control:≤5°C within 6h (no heat source)
Energy saving rate:Up to 40% for equipment room air conditioning
Low Voltage Switchgear
Modular low-voltage switchgear cabinet supporting mixed installation of withdrawable and fixed units, integrating power distribution and motor control functions, suitable for industrial power distribution scenarios.
Product Dimensions:(400-1200)×(600-1200)×2200mm
Operating Temperature:-5℃～55℃
Circuit configuration:S-type 36 circuits/U-type 48 circuits
Segregation class:Form 4b (GB7251.12-2013)
