01
Standard and universal
Industry-standard −48 V DC output with strong software/hardware compatibility for mainstream telecom equipment.
Standard Site Energy System
The standard site energy system is a general-purpose grid-fed integrated power package for telecom—combining rectification and distribution, lithium backup, and intelligent monitoring to deliver stable −48 V DC for uninterrupted power to macro sites and equipment rooms.
Solution Positioning
This standardized power-and-backup system for telecom sites uses grid as the primary input with switch-mode power and lithium storage. It integrates AC/DC distribution, surge protection, and FSU remote monitoring—fitting most conventional equipment rooms and macro base stations for carrier standard builds and existing-site retrofits.
02
Fully integrated
Combines rectification, distribution, surge protection, battery, and monitoring in one power package.
03
Backup assurance
Lithium batteries continue supplying power after grid loss to avoid service interruption.
04
Intelligent operations
Remote monitoring shows device status in real time with automatic fault alerts.
Applicable Site Types: Urban standard macro base stations / Carrier aggregation equipment rooms / Indoor telecom cabinet sites / Conventional existing-site retrofit base stations
System Operation Logic
Grid AC enters the switch-mode power supply, converts via AC/DC to standard DC, and feeds DC loads directly.
During normal supply, the power supply float-charges the battery bank to keep full reserve.
On grid loss, the battery bank seamlessly outputs DC to keep loads powered without interruption.
Find the Right Energy Solution for Your Telecom Site
Our expert team provides customized solutions and full-lifecycle support
Related Products
View All Products
Dual Layer Fan Cabinet
10-14U dual-layer outdoor fan-cooled cabinet made of metal panels, with fan cooling, integrating power distribution, monitoring, temperature control, and lightning protection, suitable for outdoor applications at small sites.
Specifications:10-14U
Main Material:Premium metal sheet
Cooling Method:Fan cooling
Integrated Functions:Equipment, power distribution, monitoring, temperature control, and lightning protection grounding
ATS Transfer Switchgear
Dual-power automatic transfer switch cabinet with a flame-retardant degreased fiber insulated switch body, supporting automatic switching between main and backup power, suitable for emergency power supply scenarios.
Product Dimensions:(400-1200)×(600-1200)×2200mm
Operating Temperature:-5℃～55℃
Insulation material:Flame-retardant degreased fiber
Applicable standard:GB/T2820
Outdoor Integrated Power
Outdoor integrated power supply with a die-cast aluminum enclosure rated IP65, modular assembly, and near-end APP monitoring support, suitable for 5G macro site, small cell site, and micro site scenarios.
IP Rating:IP65, fully enclosed natural heat dissipation
Enclosure material:Die-cast aluminum enclosure
Mounting:Supports wall-mounted and pole-mounted installation
Monitoring method:Near-end visual monitoring via mobile APP, remote operation and maintenance control
Sandwich Outdoor Cabinet
Sandwich panel outdoor all-in-one cabinet with a modular structure of sheet-metal frame and sandwich panels, protection rating IP55/IP65, suitable for outdoor base station applications.
Specifications:30U/40U options available
IP Rating:Default IP55, IP65 optional
Structural material:Sheet-metal frame plus sandwich panel material
Mounting:Modular structure, floor-standing installation
Outdoor Cab Thirty U
32U outdoor floor-standing all-in-one cabinet made of high-quality metal panels, integrating power supply, power distribution, monitoring, temperature control, batteries, and lightning protection, suitable for outdoor deployment at communication base stations.
Specifications:32U
Main Material:Premium metal sheet
Mounting:Floor-standing
Integrated Functions:Equipment, power supply, power distribution, monitoring, temperature control, batteries, and lightning protection grounding
Single Fan Outdoor Cab
10-14U single-layer outdoor fan-cooled cabinet made of metal panels with fan cooling, integrating power distribution, monitoring, temperature control, and lightning protection, suitable for outdoor applications at small sites.
Specifications:10-14U
Main Material:Premium metal sheet
Cooling Method:Fan cooling
Integrated Functions:Equipment, power distribution, monitoring, temperature control, and lightning protection grounding
Outdoor Ac Dc Power
Outdoor AC-to-DC power supply with a die-cast aluminum enclosure rated IP65, integrated lightning and surge protection, supporting wall-mounted and pole-mounted installation, suitable for outdoor power supply scenarios at micro sites.
IP Rating:IP65, die-cast aluminum enclosure with natural heat dissipation
Mounting:Wall-mounted, pole-mounted installation
Protection functions:Surge protection at input and output ends
Output characteristics:DC 48V, high power density
UPS Power Distribution
Standardized prefabricated UPS power distribution cabinet supporting hot-swappable miniature circuit breakers and three-phase load balancing adjustment, suitable for data center power distribution scenarios.
Product Dimensions:(400-1200)×(350-800)×(400-2200)mm
Operating Temperature:-5℃～55℃
Input type:Dual-power switching
Safety design:Front and rear panel isolation
Cases
View All Cases
Other Solutions
Solar-for-Diesel Energy Scenario
The solar-for-diesel energy scenario is Huijue Technology’s green retrofit for diesel-powered base stations. PV, storage, and core controllers work together to replace diesel generation with clean energy—cutting consumption and cost while enabling low-carbon site operations.
Optical Communication Network Solutions
With more than 20 years in optical transmission, Huijue covers optical distribution, patch cords, cable enclosures, and base-station accessories—building high-speed fiber bearer networks for carriers and enterprises to support 5G backhaul, IDC interconnect, campuses, industry, and more.
Base Station Stacked PV System
Huijue’s base-station stacked PV system is built for PV capacity upgrades at telecom sites. An in-house stacked-PV MPPT controller regulates DC to the site −48 V bus, adding PV as supplemental power to cut grid use—ideal for lightweight energy-saving retrofits.
Base Station Equipment Room Energy Scenario
The base-station equipment-room energy scenario covers a full range of telecom power gear, supports PV and wind input, and builds a “renewables + grid + storage” hybrid distribution system for 24/7 room power and green, energy-efficient site operation.
Data Center Solutions
Huijue data center solutions cover large and small equipment rooms, delivering micro-module cabinets, hot/cold aisles, and cabling as an integrated infrastructure package—with intelligent thermal control and operations systems for efficient, secure room operation and full-lifecycle delivery.
Intelligent Solutions
Huijue intelligent solutions combine IoT, big data, and AI with EMU cabinet-level and MEMS site-level energy management hardware plus a cloud platform—delivering integrated software-hardware smart control for parks, cities, lighting, and other digital automation upgrades.
Minimalist Communication Station
The minimalist communication station is a highly integrated photoelectric power system combining power, distribution, lithium battery, monitoring, and fiber splicing modules. It delivers standard −48 V DC with wall- or pole-mount install for micro-site power, backup, and fiber access.
Hybrid Energy Communication Site
The hybrid energy communication site solution combines PV, wind, grid, diesel, and storage with a full AC/DC power portfolio to build an intelligent hybrid distribution system—automatic multi-source dispatch, uninterrupted base-station power, and lower energy use.
Site Energy Management System
The site energy management system delivers integrated green power for telecom base stations—prioritizing clean energy across PV, wind, grid, and storage, peak-shaving to cut electricity use, with a cloud platform for remote energy and device monitoring across all sites.
