Triple Material Structure
Combination of cross-linked polyolefin heat-shrink tube, hot-melt tube, and 304 stainless steel pin provides all-around protection
Fiber Heat Shrink Tube
Product Overview
The heat-shrink splice protection sleeve is available in single-core or 12-core versions and consists of a cross-linked polyolefin heat-shrink tube, a hot-melt tube, and a reinforcing 304 stainless steel pin. It is used to protect the splice point where optical fibers are joined in fiber optic networks. Before shrinking, the transparent outer layer allows inspection of whether the fiber splice is correctly aligned, enabling simple and safe fiber assembly with protection. After shrinking, it preserves the fiber's optical transmission characteristics and provides strength and protection at the splice point, with a sealed structure that ensures long-term reliability. The product delivers stable and reliable performance and is widely used in communication network construction, operation, and maintenance.
- Specifications:
- Single-core or 12-core
- Material Composition:
- Cross-linked polyolefin heat-shrink tube, hot-melt tube, 304 stainless steel pin
- Inspection Feature:
- Transparent before shrinking, allowing inspection of correct splice alignment
- Protection functions:
- Preserves optical transmission characteristics after shrinking while providing strength and protection
Key Advantages
Transparent for Inspection
The outer layer is transparent before shrinking, allowing inspection of correct fiber splicing and ensuring installation quality
Preserves Transmission Characteristics
Does not alter the fiber's optical transmission characteristics after shrinking, ensuring signal quality
Sealed Protection
Sealed structural design provides long-term reliable strength and environmental protection for the fiber splice point
Application Scenarios
Carrier Transmission Node
For fiber access, convergence distribution and line management
Data Center
Ensure stable operation of cabinets, power distribution, cabling and key equipment
FTTx Fiber Access
Compatible with FTTH, building fiber access and ODN branching nodes
Low-Voltage Systems for Campus and Buildings
Supports access and management for park and building low-voltage systems
Related Products
View All Products
Twelve Core Pigtail
12-fiber 0.9mm pigtail, available in bundled or ribbon type, with a connector on one end and a fusion splice end on the other, multimode 850nm/500m, suitable for fiber terminal box termination applications.
Fiber Count Specification:12-fiber
Pigtail Type:Bundled pigtail, ribbon pigtail
Multimode Parameters:850nm wavelength, 500m transmission distance
Application:Fiber terminal box, 12-fiber integrated tray, cable distribution box
Indoor Soft Patchcord
Indoor fiber patch cord connector with FC/SC/LC/ST/MU connector options and PC/UPC/APC polish options, suitable for fiber transceivers and switches.
Connector type:FC、SC、LC、ST、MU
End-face type:PC、UPC、APC
Applicable equipment:Fiber transceivers, routers, switches, optical terminals
Application:Inter-Equipment Fiber Patching
Om Three Multimode Patch
OM3 10-gigabit multimode patch cord, with an indoor tight-buffered structure, supporting 10-gigabit Ethernet transmission, suitable for high-speed fiber cabling scenarios in enterprise networks and data centers.
Fiber type:OM3 multimode fiber
Structure Type:Indoor tight-buffered structure
Application:In-building backbone cabling, fiber to the desktop
Transmission rate:10-gigabit Ethernet
Armored Cable Connector
Armored cable connector with triple protection from stainless steel tube, woven steel wire, and flame-retardant jacket, offering crush resistance, tensile strength, and rodent bite protection, suitable for high-strength fiber protection applications.
Protective structure:Tight-buffered fiber, stainless steel tube, woven steel wire, flame-retardant jacket
Mechanical Properties:High crush resistance, high tensile strength
Physical Properties:Small diameter, flexible and easy to bend
Protection functions:Rodent-resistant
MPO Fiber Patch Cord
MPO multi-fiber patch cord supporting 40G/100G transmission standards, with high-density pre-connectorization, suitable for data centers and QSFP+ optical transceiver applications.
Connector Type:MPO multi-fiber connector
Transmission Standard:IEEE 802.3bm，40G/100G
Application Area:High-density data center environments, fiber-to-the-building
Equipment Compatibility:QSFP+ and other optical transceiver equipment
Remote Patch Cable
Remote fiber cable connector with connectors on both ends for RRU/BBU connection, weather-resistant for indoor and outdoor use, suitable for distributed base station remote radio deployment and inter-building connections.
Application:Local remote radio deployment within the same site, long-distance inter-building routing
Connection method:Connectors on both ends connect to the RRU and BBU respectively
Environmental Adaptability:Resistant to both indoor and outdoor environments
Installation Method:Installed via corridors, ducts, or direct laying to achieve remote radio head deployment
Om Four Multimode Patch
OM4 10-gigabit multimode patch cord, developed for VCSEL laser transmission, with effective bandwidth more than double that of OM3, suitable for high-speed transmission scenarios in data centers.
Fiber type:OM4 multimode fiber
Transmission light source:Optimized for VCSEL lasers
Bandwidth advantage:Effective bandwidth more than double that of OM3
Transmission rate:High speed of 10 gigabits and above
Dual Core Patchcord
Duplex patch cord connector with side-by-side figure-8 dual-fiber cable, FC/SC/LC connector options, suitable for duplex fiber transceiver and switch connections.
Structure Type:Side-by-side dual fibers, figure-8 cable
Connector type:FC, SC, LC, ST, MU options available
End-face type:PC, UPC, APC options available
Applicable equipment:Duplex fiber interface equipment
