Angle Steel Cable Tray Zxj Series

Angle Steel Cable Tray Zxj Series

Product Overview

The HJ ZXJ angle steel cable rack is a standard cable support rack for communication equipment rooms, using angle steel as the main girder and flat steel as the cross-bars, assembled with modular bolted connections for a stable, high-load-bearing structure. It is available in single-tier and double-tier series, with four mainstream widths to choose from. The double-tier version is equipped with dedicated spacer columns for tiered cabling, enabling zoned isolation of power and low-voltage/fiber cables.

Structure Type:
Single-layer and double-layer configurations
Standard Width:
300/400/600/800mm
Corrosion-resistant treatment:
Hot-dip galvanized (outdoor), electro-galvanized / electrostatic powder coated (indoor)
Matching accessories:
Main girders, cross-bars, hangers, floor supports, grounding fasteners, and double-tier spacer columns
Live Chat Request Brochure

Key Advantages

High-load-bearing angle steel frame

The rigid angle steel main girder can support large volumes of cable and resists deformation and sagging over long-term use

Double-tier zoned cabling solution

The double-tier model separates fiber and power cables into different tiers, reducing electromagnetic interference and keeping cabling organized

Multiple corrosion-resistant treatments for all scenarios

Hot-dip galvanizing resists outdoor salt-spray corrosion, while powder coating provides an attractive, rust-resistant indoor finish, covering both indoor and outdoor equipment room needs

Standardized modular assembly

Unified matching accessories allow simple assembly, with on-site cutting to adjust length and turning direction as needed

Angle Steel Cable Tray Zxj Series

Application Scenarios

Data Center

Data Center

Ensure stable operation of cabinets, power distribution, cabling and key equipment

Carrier Transmission Node

Carrier Transmission Node

For fiber access, convergence distribution and line management

Enterprise Computer Rooms & Edge Nodes

Enterprise Computer Rooms & Edge Nodes

Supports centralized deployment of small computer rooms and edge computing nodes

Low-Voltage Systems for Campus and Buildings

Low-Voltage Systems for Campus and Buildings

Supports access and management for park and building low-voltage systems

Technical Specifications

No. Model Name Type Width (mm) Application Scenario Surface treatment
1 HJ ZXJ11-J1A3 Angle-steel cable tray Single layer 300 Outdoor Hot-dip galvanized
2 HJ ZXJ11-J1A4 Angle-steel cable tray Single layer 400 Outdoor Hot-dip galvanized
3 HJ ZXJ11-J1A6 Angle-steel cable tray Single layer 600 Outdoor Hot-dip galvanized
4 HJ ZXJ11-J1A8 Angle-steel cable tray Single layer 800 Outdoor Hot-dip galvanized
5 HJ ZXJ21-J1B3 Angle-steel cable tray Single layer 300 Indoor Electro-galvanized
6 HJ ZXJ21-J1B4 Angle-steel cable tray Single layer 400 Indoor Electro-galvanized
7 HJ ZXJ21-J1B6 Angle-steel cable tray Single layer 600 Indoor Electro-galvanized
8 HJ ZXJ21-J1B8 Angle-steel cable tray Single layer 800 Indoor Electro-galvanized
9 HJ ZXJ21-J1C3 Angle-steel cable tray Single layer 300 Indoor Electrostatic powder coating
10 HJ ZXJ21-J1C4 Angle-steel cable tray Single layer 400 Indoor Electrostatic powder coating
11 HJ ZXJ21-J1C6 Angle-steel cable tray Single layer 600 Indoor Electrostatic powder coating
12 HJ ZXJ21-J1C8 Angle-steel cable tray Single layer 800 Indoor Electrostatic powder coating
13 HJ ZXJ12-J1D3 Angle-steel cable tray Double layer 300 Outdoor Hot-dip galvanized
14 HJ ZXJ12-J1D4 Angle-steel cable tray Double layer 400 Outdoor Hot-dip galvanized
15 HJ ZXJ12-J1D6 Angle-steel cable tray Double layer 600 Outdoor Hot-dip galvanized
16 HJ ZXJ12-J1D8 Angle-steel cable tray Double layer 800 Outdoor Hot-dip galvanized
17 HJ ZXJ22-J1E3 Angle-steel cable tray Double layer 300 Indoor Electro-galvanized
18 HJ ZXJ22-J1E4 Angle-steel cable tray Double layer 400 Indoor Electro-galvanized
19 HJ ZXJ22-J1E6 Angle-steel cable tray Double layer 600 Indoor Electro-galvanized
20 HJ ZXJ22-J1E8 Angle-steel cable tray Double layer 800 Indoor Electro-galvanized
21 HJ ZXJ22-J1F3 Angle-steel cable tray Double layer 300 Indoor Electrostatic powder coating
22 HJ ZXJ22-J1F4 Angle-steel cable tray Double layer 400 Indoor Electrostatic powder coating
23 HJ ZXJ22-J1F6 Angle-steel cable tray Double layer 600 Indoor Electrostatic powder coating
24 HJ ZXJ22-J1F8 Angle-steel cable tray Double layer 800 Indoor Electrostatic powder coating

HJ ZXJ1(2)1-J1 Series Single-Layer Angle Steel Cable Tray Per-Meter Configuration Table:

No. Accessory name Unit Qty Remarks
1 Main beam m 2 Length 1 m; when tray width ≥800 mm, add 1 main beam at the center
2 Crossbar pcs 4 Length equals tray width; spacing 250 mm
3 Support pcs 0.1 Floor support; length matches equipment-room height
4 Hanger pcs 0.67 Length matches equipment-room height
5 Mounting accessories set 1 Other parts required for complete tray installation (including but not limited to reinforcements, fasteners, grounding wires, etc.)

HJ ZXJ1(2)2-J1 Series Double-Layer Angle Steel Cable Tray Per-Meter Configuration Table:

No. Accessory name Unit Qty Remarks
1 Main beam m 4 Length 1 m; when tray width ≥800 mm, add 1 main beam at the center
2 Crossbar pcs 8 Length equals tray width; spacing 250 mm
3 Support pcs 0.1 Floor support; length matches equipment-room height
4 Hanger pcs 0.67 Length matches equipment-room height
5 Mounting accessories set 1 Other parts required for complete tray installation (including but not limited to reinforcements, fasteners, grounding wires, etc.)
6 Double-Layer Spacer Post pcs 1.33 Length is double-layer spacing; double-layer spacer post height ≥250mm

Note: Can be specially adjusted according to the equipment room cabling layout diagram

Note: Specifications shown are standard values. Actual performance may vary depending on installation environment, component compatibility, and grid conditions. We reserve the right to continuously optimize design and specifications. For final technical proposals and formal quotations, please contact our sales team to request an official specification confirmation document.

Contact Us for Product Spec Sheet

Related Products

View All Products
Flat Steel Cable Tray Zxj B Series

Flat Steel Cable Tray Zxj B Series

Riveted flat-steel open equipment room cable rack, available in single-tier/double-tier and multiple widths, with multiple corrosion-resistant treatments for indoor and outdoor use, for organized routing of fiber, network, and power cables in equipment rooms.

Structural configuration:Single-layer and double-layer

Standard Width:300/400/600/800mm

Surface treatment:Hot-dip galvanized (outdoor), electro-galvanized / electrostatic powder coated (indoor)

Standard accessories:Main girders, cross-bars, hangers, supports, fasteners, and double-tier spacer columns (double-tier version only)

View Details » Inquire
U Series Wire Mesh Network Tray

U Series Wire Mesh Network Tray

U-shaped open galvanized mesh tray, lightweight with high heat dissipation, dedicated cable tray for laying network and power cables in data centers/communication equipment rooms

Main body model:U-series mesh tray, standard 3-meter sections sold by the meter

Base material:Q23 carbon steel, 201/304/316 stainless steel

Surface treatment:Electro-galvanized/powder-coated (indoor), hot-dip galvanized/polished stainless steel (outdoor)

Complete set of accessories:M16 hanger rods, cross supports, grounding bolts, corner reinforcement strips, end caps, drop-out plates, and clips

View Details » Inquire
50 50 Aluminum Cable Tray Zxj L2

50 50 Aluminum Cable Tray Zxj L2

50×50 thickened aluminum alloy equipment room cable tray, available in single-tier/double-tier, load capacity ≥300KG per meter, for organized high-capacity fiber and cable routing in indoor equipment rooms

Profile specification:50×50mm aluminum alloy square tube

Structure Type:Single-layer, double-layer

Optional widths:300/400/600/800mm

Load-bearing performance:Load capacity ≥300KG per meter

View Details » Inquire
31 45 Aluminum Tray Zxj L3

31 45 Aluminum Tray Zxj L3

31×45 standard profile aluminum alloy cable rack, available in single-tier and double-tier, with stable load-bearing over a 1.5-meter span, for organized fiber and network cable routing in indoor communication equipment rooms.

Profile cross-section:31×45mm aluminum alloy

Structure Type:Single-layer, double-layer

Optional widths:300/400/600/800mm

Load-bearing performance:1.5-meter span: 5mm deformation at 150KG, 7mm deformation at 195KG

View Details » Inquire
Wire Mesh Cable Tray T Series

Wire Mesh Cable Tray T Series

Lightweight perforated metal mesh structure for laying power and communication cables, used for cabling in data centers and communication equipment rooms

Main body model:T-series standard mesh tray

Matching accessories:Full set including cross-bar supports, M16 hanger rods, grounding bolts, corner reinforcement strips, and end caps

Connection method:Quick clip-together assembly allows corners, tees, and crosses to be freely formed on site

Installation method:Dual-use: ceiling suspension or wall bracket mounting

View Details » Inquire
Closed Tray Cable Tray Hj Csqj

Closed Tray Cable Tray Hj Csqj

Fully enclosed metal trough body shields and protects cables, used for low-voltage cabling in corrosive equipment room environments

Structure:Fully enclosed trough body with optional matching cover plate

Height:Multiple sizes: 15/30/50/100/150mm

Width:Full size coverage from 50-600mm

Panel thickness:Optional thickened steel plate from 1.0-2.0mm

View Details » Inquire
Aluminum Cable Tray Zxj L Series

Aluminum Cable Tray Zxj L Series

Aluminum alloy open equipment room cable rack, available in single-tier/double-tier and multiple profile sizes, lightweight and high-strength, for organized routing of fiber, network, and power cables in indoor equipment rooms

Structural configuration:Single-layer and double-layer

Standard Width:300/400/600/800mm

Profile cross-section:31×45mm, thickness options of 4.3/4.5/5.0/5.4/6.0mm

Standard accessories:Main girders, cross-bars, hangers, floor supports, fasteners, and double-tier spacer columns (double-tier version only)

View Details » Inquire
BBU Synthetic Cabinet

BBU Synthetic Cabinet

5G BBU integrated floor-standing cabinet with independent air ducts and three-line separation, compatible with equipment from multiple vendors, designed specifically for centralized deployment at 5G base stations.

Cabinet dimensions:2200×600×600mm

Total capacity:47U

Per-frame capacity:5 BBU units

Air intake method:Front intake, rear exhaust

View Details » Inquire

Cases

View All Cases
Mauritania Base Station Pv Storage Africa · Mauritania

Mauritania Site Energy Solution

Huijue delivered seven integrated PV–storage–diesel off-grid energy cabinets for grid-absent areas in Mauritania. Intelligent PV + storage + diesel coordination with remote EMS monitoring solves base-station outages and high fuel use—ready for batch deployment at remote overseas sites.

PV-Storage-Diesel Hybrid Microgrid Unattended Base Station Energy Cabinet
Fengcheng Smart Lamp Post China · Shanghai

Multi-Function Smart Pole Deployment

The Fengxian Fengcheng Industrial Park smart combined-pole retrofit integrates 5G, lighting, CCTV, outdoor displays, environmental sensing, and public services on one pole—with unified platform O&M, fewer standalone poles, and a stronger park smart-city sensing network.

Smart Multi-Function Pole Smart Campus Street Lighting
Fengxian Qinhu Base Station Pv Storage China · Shanghai

Shanghai Fengxian Tower Qinhuo Site — Telecom Base Station PV and Energy Storage Retrofit

Huijue delivered an integrated PV-storage retrofit for the Shanghai Fengxian Qinhuo tower base station: 8.8 kW rooftop PV, 204.8 kWh battery storage, and a backup diesel genset forming a site microgrid with automatic multi-source switching—cutting electricity and O&M costs while ensuring round-the-clock power for low-carbon telecom upgrades.

Base Station PV & Energy Storage Telecom Site PV Overlay
Data Center Construction China

Data Center Construction

A Huijue one-stop data center delivery case providing full equipment-room infrastructure for carriers, with multi-province China Telecom, China Mobile, and China Unicom project experience—energy-efficient, reliable, easy to maintain, and elastically expandable for enterprise and carrier IDC and cloud rooms.

Data Center Supporting IDC Data Center Construction

Reliable protection for critical infrastructure

Contact Engineering Team