Indoor Single-mode / Multimode Optical Cable

Product Overview

Indoor single-mode / multimode optical cable serves equipment rooms, buildings, and structured cabling. It supports G652D/G657A single-mode and OM1–OM4 multimode fiber, simplex or duplex construction, and flexible 2–288 fiber counts. Standard LSZH low-smoke zero-halogen jacket produces low smoke and no halogen when burning and meets relevant flame-retardant requirements. Operating temperature -40℃~+60℃, with OEM/ODM options. Stable and reliable for telecom network build-out and O&M.

Product Type:
Indoor cable GJBFJH/GJBFJV
Fiber Type:
SM G652D/G657A; MM OM1–OM4
Fiber Count:
2–288 fibers customizable
Jacket Material:
LSZH (standard) / PVC (optional)

Key Advantages

Full SM/MM Coverage

Covers mainstream single-mode and OM multimode needs

High Fiber Count Customization

Flexible 2–288 fiber configurations for different capacities

LSZH Safety Jacket

Low-smoke zero-halogen for enclosed indoor environments

Traceable Quality

Optional branded fiber, factory inspection, and long warranty

Indoor Single-mode / Multimode Optical Cable

Application Scenarios

FTTx Fiber Access

FTTx Fiber Access

Compatible with FTTH, building fiber access and ODN branching nodes

Carrier Transmission Node

Carrier Transmission Node

For fiber access, convergence distribution and line management

Unattended Outdoor Base Station Sites

Unattended Outdoor Base Station Sites

Suitable for long-term stable operation in complex outdoor environments

Traffic & Communication Node

Traffic & Communication Node

Applicable for deployment along highways, railways, tunnels and monitoring sites

Technical Specifications

Parameter Value / Description
Product Type Indoor optical cable GJBFJH / GJBFJV
Fiber Type G652D / G657A1 / G657A2 (single-mode); OM1 / OM2 / OM3 / OM4 (multimode)
Construction Simplex / Duplex
Fiber Count 2 / 4 / 6 / 12 / 24 / 48 / 96 / 288 fibers (customizable)
Jacket Material LSZH (standard) / PVC (optional)
Installation Indoor duct / Indoor cable tray
Warranty 15 years

 

Parameter Value / Description
Fiber Attenuation @1310/1550nm (SM) ≤0.35 / 0.22 dB/km
Fiber Attenuation @850/1300nm (OM3 MM) ≤2.5 / 0.8 dB/km
Operating Temperature -40℃~+60℃
Bend Radius (Dynamic) ≥10× outer diameter
Bend Radius (Static) ≥5× outer diameter
Tensile Strength ≥270 N (short-term)
Crush Strength ≥1000 N/100mm

Note: Specifications shown are standard values. Actual performance may vary depending on installation environment, component compatibility, and grid conditions. We reserve the right to continuously optimize design and specifications. For final technical proposals and formal quotations, please contact our sales team to request an official specification confirmation document.

Related Products

View All Products

Hybrid Power-Fiber Cable for Access Networks

Hybrid power-fiber cable integrating fiber and power for BBU–RRU DC remote powering and direct burial.

Positioning:Hybrid power-fiber integrated cable

Typical Application:Distributed base-station DC remote powering

Connection:BBU and RRU

Installation:Suitable for direct burial

ADSS All-Dielectric Self-Supporting Cable

ADSS all-dielectric self-supporting cable for live-line installation, long spans, and tracking resistance on joint-pole aerial routes.

Installation:Live-line installation capable

Jacket Option:AT jacket for tracking resistance

Span Capability:Maximum span over 1000 m

Expected Life:Over 30 years

5.0/7.0mm FTTA Remote Base Station Cable

FTTA remote base station cable with dual-fiber SM tight buffer and aramid yarn for 4G/5G remote radio links.

Fiber Type:G.652D / G.657A1 / A2 optional

Operating Wavelength:1310nm, 1550nm

Operating Temperature:-40℃~+75℃

Ingress Protection:Finished connector IP67/IP68

Central Tube Flame-Retardant Optical Cable

Central tube flame-retardant cable with PSP steel tape and parallel steel wires for building and duct flame-retardant routes.

Construction:Central tube loose-tube structure

Flame Retardance:Special flame-retardant jacket material

Strength Design:Two parallel steel wires + double-coated steel tape

Features:Small diameter, light weight, easy to install

Central Tube Light-Armored Optical Cable

Central tube light-armored cable with PSP steel tape and parallel steel wires for duct and aerial light-armored routes.

Construction:Central tube loose-tube structure

Armor:Double-coated steel tape (PSP)

Strength Design:Two parallel steel wires

Features:Small diameter, light weight, easy to install

Reliable protection for critical infrastructure

Contact Engineering Team