Telecom equipment, power distribution systems, and energy infrastructure products
PV AC grid-connected power distribution cabinet with integrated lightning protection, anti-islanding protection, and a visible isolation switch disconnect point, suitable for PV grid-connected power generation scenarios.
Lightning protection:Input surge arrester
Metering method:Sealed energy meter
Monitoring interface:RS485 (optional)
Safety configuration:Visible isolation switch disconnect point
Dual-power automatic transfer switch cabinet with a flame-retardant degreased fiber insulated switch body, supporting automatic switching between main and backup power, suitable for emergency power supply scenarios.
Product Dimensions:(400-1200)×(600-1200)×2200mm
Operating Temperature:-5℃～55℃
Insulation material:Flame-retardant degreased fiber
Applicable standard:GB/T2820
Outdoor integrated power cabinet with integrated batteries, rectifiers, and AC/DC power distribution, equipped with a 200A rectifier power supply, suitable for communication base station scenarios.
Product Dimensions:2000×700×700mm
IP Rating:IP55 (outdoor air-conditioned type)
Static load capacity:≥1200kg (floor-standing)
Panel material:2.0mm aluminum-zinc coated sheet (uprights)
Two-stage distribution power control box with a high-quality cold-rolled steel enclosure, integrating Class C and D surge arresters and lightning strike counting, suitable for highway scenarios.
Power distribution method:Two-stage distribution
Mounting:Wall-mounted/19-inch rack
Enclosure material:High-quality cold-rolled steel sheet
Lightning protection configuration:Class C/D optional
Standardized prefabricated UPS power distribution cabinet supporting hot-swappable miniature circuit breakers and three-phase load balancing adjustment, suitable for data center power distribution scenarios.
Product Dimensions:(400-1200)×(350-800)×(400-2200)mm
Operating Temperature:-5℃～55℃
Input type:Dual-power switching
Safety design:Front and rear panel isolation
Six-sided insulated phase-change energy storage thermostatic box with a heat transfer coefficient of no more than 0.3W/(m²·K), supporting passive temperature control and remote monitoring, suitable for base station battery scenarios.
Heat transfer coefficient:≤0.3W/(㎡·K)
IP Rating:IP45
Temperature rise control:≤5°C within 6h (no heat source)
Energy saving rate:Up to 40% for equipment room air conditioning
Modular low-voltage switchgear cabinet supporting mixed installation of withdrawable and fixed units, integrating power distribution and motor control functions, suitable for industrial power distribution scenarios.
Product Dimensions:(400-1200)×(600-1200)×2200mm
Operating Temperature:-5℃～55℃
Circuit configuration:S-type 36 circuits/U-type 48 circuits
Segregation class:Form 4b (GB7251.12-2013)
Integrated cabinet-level BBU energy-saving cabinet with a built-in 3.5kW cooling system, modular prefabrication, and support for multi-cabinet parallel connection, reducing cooling energy consumption in 5G equipment rooms.
Overall dimensions:2000/2200×600×1000mm
Cooling capacity:3.5KW
Capacity:42/46U
Parallel connection capability:2-3 units
5G BBU integrated floor-standing cabinet with independent air ducts and three-line separation, compatible with equipment from multiple vendors, designed specifically for centralized deployment at 5G base stations.
Cabinet dimensions:2200×600×600mm
Total capacity:47U
Per-frame capacity:5 BBU units
Air intake method:Front intake, rear exhaust
Standard 19/21-inch IDC floor-standing cabinet with high load capacity and high ventilation, meeting the needs of bulk server and storage device installation in data centers.
Installation dimensions:19/21 inch
Panel material:Baosteel cold-rolled steel sheet
Static load:1000~1200KG
IP Rating:IP20
19/21-inch floor-standing network server cabinet with high-ventilation mesh doors, extra-large load capacity, and multi-standard compliance, dedicated for high-density equipment deployment in data centers.
Installation dimensions:19/21 inch
Panel thickness:Square-hole strip, 1.5-2.0mm
Static load:1000~1200KG
19/21-inch floor-standing heavy-duty cabinet with top and bottom ventilated mesh doors, removable side panels, static load of 1000-1200KG, suitable for installing rack-mounted IT equipment in equipment rooms.
Mounting Specs:19/21-inch standard
Static load capacity:1000~1200KG
IP Rating:IP20
Operating Temperature:-5℃~55℃
Dedicated floor-standing data center cabinet with high-density mesh door design, high load-bearing capacity suited to servers, compatible with multiple international industry standards, suitable for bulk deployment in large IDC facilities.
Mounting Specs:19/21 inch
Static load capacity:600~800KG
IP Rating:IP20
Operating Temperature:-5℃~55℃
Floor-standing heavy-duty 19/21-inch server cabinet with multiple door styles available, load capacity of 600-800KG, compliant with multiple national equipment room standards, suitable for centralized server deployment in equipment rooms.
Mounting Specs:19/21-inch standard
Static load capacity:600~800KG
IP Rating:IP20
Operating Temperature:-5℃~55℃
Standard 19/21-inch sheet-metal cabinet for network, server, and similar equipment, suitable for both wall-mounted and floor-standing installation, compliant with multiple international and domestic standards, IP20 protection.
Installation dimensions:19/21 inch
Load-bearing capacity:60~100KG
IP Rating:IP20
Operating Temperature:-5℃~55℃
The single-sided cold aisle encloses one side of the cold air zone in front of cabinets, with a complete set of modular components that isolate cold/hot air mixing; the roof hatch supports fire suppression linkage, suitable for medium and large high-density equipment rooms.
Compatible Cabinet:6-15 units, 1-8kW per cabinet
Aisle Width:1000/1200mm optional
Main material configuration:Tempered glass, steel panels
Accessories:Doors, roof hatch, fire suppression control system
The single-sided hot aisle encloses one side of the hot air zone behind cabinets, with a complete set of modular components that centrally recover equipment exhaust air and isolate cold/hot air mixing, suitable for medium and large high-density equipment rooms.
Compatible Cabinet:6-15 units, 1-8kW per cabinet
Aisle Width:1000/1200mm optional
Main material configuration:Tempered glass, steel components
Accessories:Doors, roof hatch, dummy walls, monitoring
The standard hot aisle is an enclosed heat-dissipation system at the rear of cabinets that collects the hot air exhausted by equipment. It is modularly assembled with tempered glass components, suitable for medium and large high-density equipment rooms.
Compatible Cabinet:6-15 units, 1-8kW per cabinet
Aisle Width:1000/1200mm optional
Main body material:Safety tempered glass, steel panels
Matching components:Aisle doors, roof hatch, side panels
The standard cold aisle is an enclosed heat-dissipation component for equipment rooms that isolates cold and hot airflow from mixing. It is modularly assembled with a fire-suppression-linked roof hatch, suitable for medium and large high-density server rooms.
Compatible Cabinet:6-15 units, 1-8kW per cabinet
Aisle Width:1000/1200mm optional
Roof hatch function:Fire-suppression-linked automatic opening
Matching components:Doors, panels, and monitoring system
The HC series containerized micro-module integrates a complete set of equipment room facilities, usable in outdoor scenarios without a dedicated equipment room; the prefabricated unit can be transported worldwide, is energy-efficient, and supports remote automated operations and maintenance.
Carrier:Standard shipping container, seismic resistance level 8
Environment:All-weather operation from -20°C to 45°C
Delivery:Factory prefabricated, reducing construction time by 50%
Operations and maintenance:Equipped with remote intelligent management and control
